Accessible Ip Settings - Moxa Technologies NE-4100 User Manual

NE-4100 Series User's Manual

Accessible IP Settings

Click on the Accessible IP Settings link on the left side of the screen to display serial settings.
Make necessary changes to the settings and click on Submit to validate the modifications.
NE-4100 has an IP address based filtering method to control access to the NE-4100.
Accessible IP Settings allows you to add or remove "Legal" remote host IP addresses to prevent
unauthorized access. Access to NE-4100 is controlled by IP address. That is, if a host's IP address
is in the accessible IP table, then the host will be allowed access to the NE-4100. You can allow
one of the following cases by setting the parameter.
# Only one host with a specific IP address can access the NE-4100
Enter "IP address/255.255.255.255" (e.g., "192.168.1.1/255.255.255.255").
# Hosts on a given subnet can access the NE-4100
Enter "IP address/255.255.255.0" (e.g., "192.168.1.0/255.255.255.0").
# Any host can access the NE-4100
Disable this function. Refer to the following table for more details about the configuration
example.
Allowable Hosts
Any host
192.168.1.120
192.168.1.1 to 192.168.1.254
192.168.0.1 to 192.168.255.254
192.168.1.1 to 192.168.1.126
192.168.1.129 to 192.168.1.254
Input format
Disable
192.168.1.120 / 255.255.255.255
192.168.1.0 / 255.255.255.0
192.168.0.0 / 255.255.0.0
192.168.1.0 / 255.255.255.128
192.168.1.128 / 255.255.255.128
6-17
Web Console Configuration