Safety Valve Drain (Dhw); Safety Valve Drain (Ch) - IDEAL istor HE260 Installation And Servicing

17 SAFETY VALVE DRAIN (DHW)

The discharge pipe should be
positioned so that the
discharge of water or steam
cannot create a hazard to the
occupants of the premises or
damage the electrical
components and wiring.
IMPORTANT.
The discharge pipe
arrangement must comply with
G3 Building Regulations. This
is covered in Frames 6 and 7.

18 SAFETY VALVE DRAIN (CH)

A preformed 15mm is supplied strapped to
the cylinder module frame. This pipe
connects to the safety valve, and projects
through the RH hole in the pre-piping
frame, for routing the drain under and away
from the appliance.
Note.
The length of this pipe is suitable for the
HE260 model. For the HE325 model
100mm should be cut off the longer
section.
istor system store -
Installation and Servicing
INSTALLATION
21