Assemble The Fuselage - GREAT PLANES ZERO Instruction Manual

15. A few paper towels cut into small squares and denatured
alcohol will be useful for cleaning off excess epoxy during the
next step while gluing the wing halves together.
16. Apply 30-minute epoxy to all joining surfaces including
the root ribs and the "Joiner Pockets" inside the wings where
the joiner goes. Securely hold the wing halves together with
masking tape and small clamps or clips on the tabs. As you
proceed, use paper towel squares dampened with denatured
alcohol to wipe away excess epoxy.
17. After the epoxy has hardened remove the clamps
and tape.

ASSEMBLE THE FUSELAGE

1. Cut and remove the spacer from the slot for the horizontal
stabilizer at the back of the fuselage.
2. Mount the wing to the fuselage with two 10-24 x 2" nylon
wing bolts (for convenience, you may shorten the wing bolts
by cutting them to a length of 1-1/2" [40 mm]).
7