Table of Contents
Advertisement
■
User mode
A user can change password only.
Current password input field
New password input field
New password input field (re-enter for confirmation)
Button for executing password change
Note
●
Up to 16 alphanumeric characters can be used for a
password.
●
When changing the administrator account, both
"Current user name" and "Current password" are
required.
Network config page
When connecting by logging in with administer
privileges, you can make detailed settings for network
related to display.
■
LAN settings
1
Click [Detailed set up] in the menu.
2
Click [Next].
The settings window appears, showing the current
settings.
To change the LAN settings, click [Change].
•
To return to the previous window, click [Back].
•
3
Complete the detailed settings and
click [Next].
Setting contents here are the same as the address
information contents set for the [LAN setup] menu of
the Display.
1
After all required items have been entered, click
2
[Next]. Then, a confirmation window appears.
3
4
4
Click [Submit].
The settings will be registered.
Note
●
Changing the setting of LAN while connected with
LAN might disconnect the connection.
Adjust clock page
Click [Detailed set up], then [Adjust clock] to display the
Adjust clock page.
New date field
New time field
Button to update time and date settings
Note
●
Date and time is displayed as [- -] when they are not
set.
●
When [Network control] is set to [On] and it is in
standby mode, date and time display will be blank
and they cannot be set.
●
If the time becomes incorrect immediately after
setting the correct time, contact the dealer where you
bought the Display.
81
English
Advertisement
Table of Contents
