Picture Adjustments; Advanced Settings - Panasonic TH-37PWD4 Operating Instructions Manual

PICTURE Adjustments
Item Effect Adlustments
PICTURE '_ • Selects the proper brightness and
Lass
Mare density far the room
BRIGHTNESS • • Adjusls rer easier viewing of dark pictures
Darker Brighter such as mght scenes and black hair
COLOR • • AdJustsslightly to a lighter color
Less MDFB
TINT • • Adjust far nice skin color
(NTSC only) Reddish Gr=Bnlsh
SHARPNESS • • Displays a sharp wmage
LEss More
Notes
(1) "COLOR", "TINT" and "SHARPNESS"
settings cannel be adjusted for "RGB"
and "PC" Input signal modes
(2) You can change the level ef each
function (PICTURE, []RIGHTNESS,
COLOR, TINT, SHARPNESS) far
each PICTURE menu
(3) The setting details for normal,
dynamic and cinema respectwely are
memorized separately Jareach input
mode (VIDEO, COMPONENT, RGB)
(4) The "TIN'I-" setting can be adjusted for
NTSC signal only
Note
There is little change when PICTURE is increased with a bright picture or reduced with a dark picture
ADVANCED SETTINGS
Item Effect Details
BLACK • • Adjusts the dark shades of the Image In gradJallan
EXTENSION
Lass Mura
W/B HIGH R • • AdJusts the while balance rer light red areas
L_ss Murs
W/B HIGH B • • Adjusts the white balance for light blue areas
Less Morn
W/B LOW R • • AdJuststhe white balance far dark red areas
Lass Mere
W/B LOW [] • • Adjusts the white balance far dark blue areas
Less M0rB
GAMMA • • 20 <---> 22 _ 25
Down Up
Notes
(1) Carry out "W/B" adjustment as follows
(_ AdJust the wh=tebalance ef the bnght sections using the "W/B HIGH R" and "W/B HIGH B" sett=ngs
(_) AdJust the white balance of the dark sections using the "W/B LOW R" and "W/B LOW B" settings
(_ Repeat steps _) and I_) te adjust
Steps _) and _) affect each other's settings, se repeat each step In turn te make the adjuslment
(2) The adjuetment values are memenzed eeparately for each input made (VIDEO, COMPONENT, RGB and PC)
(3) The adjustment range values should be used as an adjustment rererence
Helpful Hint ( / C NORMAL ZE Normalization)
On the remote control unit, while the "Advanced seatings" menu IS displayed, If either the N button is pressed at any
time or the _ (Access button) Is pressed during "Nermahse", then all adjustment values are returned te the factory
settings
29