Data Cloning; Copying The Display Data To The Usb Memory - Panasonic H-55LFV60U Operating Instructions Manual

Full hd lcd display
Table of Contents

Advertisement

Data Cloning

Menu settings and adjusted values set on a single
display can be copied to multiple displays using a USB
memory.
Data that can be copied
Settings and set values of [Picture], [Sound], [Setup],
[Position] and [Options] menus
The following data cannot be copied. Setting is
required for each display.
[Date and time]
Setting for [Network settings] - [LAN setup]
Display ID in [Control settings]
Supported device
Commercially available USB memory devices are
supported. (Those with security functions are not
supported.)
USB memory devices other than those formatted in
FAT16 or FAT32 cannot be used.
Up to 32 GB of USB memory in size are supported.
Only single partition configuration is supported.
Note
The cloning function does not operate between LFV6
and LFV60 series. Use between the same series.
The remote control is used to display [USB data
cloning] menu. Unit buttons cannot be used to display
the menu.
Set the input to something other than [USB], and
perform the data cloning.
96
English
Copying the display data to the USB
memory
1
Insert the USB memory device to the
USB terminal at the bottom of the
display.
Note
Depending on the type of a USB memory device,
it may come in contact with the periphery such
as a back cover, and cannot be attached. Use a
commercially sold extension cable, or use a small
type of a USB memory device connectable to this
unit.
Failure to save in or read from the USB memory
displays an error message.
2
After the [Select Copy Type] screen is
displayed, go to the step 6.
When the [Select Copy Type] screen is not
displayed, follow the steps 3 to 5 to display.
3
Display [Setup] menu pressing
<SETUP>.
4
Select [OSD language] with
press <ENTER> for over 3 seconds.
The following display appears.
Options
Display serial number
Software licenses
USB data cloning
Shipping
5
Select [USB data cloning] with
and press <ENTER>.
6
Select [Display → USB Memory] with
and press <ENTER>.
Select Copy Type
Display → USB Memory
USB Memory → Display
USB terminal
USB memory
and

Advertisement

Table of Contents
loading

This manual is also suitable for:

Th-55lfv6wTh-55lfv6uTh-55lfv60w

Table of Contents