Table of Contents
Advertisement
21
Electrolux Steam Iron ESI510 / ESI510T / ESI520 / ESI520T Operating Instruction
4. Let the iron cool down before you store it.
F. Storage
1. Make sure the appliance is unplugged and set the steam control to position
2. Empty the water tank.
3. Store the iron on its heel in a safe and dry place.
G. Troubleshooting
This chapter summarizes the most common problems you could encounter with
your iron. If you are unable to solve the problem, contact the Consumer Care
Center in your country
No.
Problem
1
The soleplate
is cold even
when the iron
is plugged in
2
The iron does
not produce
any steam
3
Water leaks
from the
soleplate
during ironing.
4
The spray
function does
not work.
Cause
There is
Check the mains cord, plug and wall
connection
socket.
problem
The temperature
Set the temperature dial to the
dial has been set
required temperature.
to MIN.
There is not
Fill the water tank.(See chapter
enough water in
"Using the appliance")
the water tank.
The steam
Set the steam control to low steam
control has been
position to high steam position.( See
chapter "Using the appliance")
set to position
The iron is not
Set the temperature dial to a
hot enough.
temperature suitable for steam
ironing(●● to MAX).Put the iron on its
heel and wait until the light has gone
out before you start ironing.
There is not
Fill the water tank.(See chapter
enough water in
"Using the appliance")
the water tank.
Solution
Advertisement
Table of Contents
