Components A. Ultrasteam soleplate G. Auto clean and variable steam knob K. Temperature selector (only for models (only for models ESI710/ ESI730), Auto ESI710/ESI730), Auto steam selector B. Maximum water level indicator clean and on/off steam knob (only for (only for model ESI750) C.
Instruction book Using the iron Before using the iron for the first time, please read the safety advice. Safety advice Read this instruction manual carefully • The appliance should only be • The soleplate of the iron and nearby before using the iron for the first time connected to the power supply if its surfaces can become extremely hot and save for future reference.
Setting table for models without Autosteam function (models ESI710/ESI730) Setting table for models with Autosteam function (model ESI750) Fabric Temperature setting Steam setting Ironing recommendation Fabric Temperature setting Ironing recommendation Acrylic • Dry iron on wrong side. Acrylic • Dry iron on wrong side. Acetate •...
Using the iron Cleaning (do not use any detergent) 4. Using the Spray mist to remove 5. Turbo shot of steam function. 6. Vertical steaming. 1. Unplug the iron before cleaning. 2. Cleaning the soleplate. 3. Permanent Anti-scale cartridge stubborn creases. (depending on models).
There is a connection problem. Check the main power supply cable, the This document sets out the terms and conditions of the product warranties for Electrolux Appliances. It is an important document. Please keep it with your proof the iron is plugged in plug and the wall outlet.
Ph: (09) 9573 2220 Customer Service - Ph: 0508 730 730 www.electrolux.co.nz *Due to the Electrolux policy of continual product development; specifications, colours and details of our products and those mentioned in this manual are subject to change without notice.