Table of Contents
Advertisement
Electrolux Steam Iron ESI510/ ESI510T / ESI520 / ESI520T Operating Instruction
Woolen fabrics and cotton fabrics, etc. should be ironed separately.
•
The iron heats up quicker than cooling down, therefore, you should
start ironing the articles requiring the lowest temperature such as those
made of synthetic fiber.
•
If the fabric consists of various kinds of fibers, you must always select
the lowest ironing temperature to iron the composition of those fibers.
•
Silk and other fabrics that are likely to become shiny should be ironed
on the inner side. To prevent staining, do not spray water straight on
silk or other delicate fabrics.
•
Velvet and other textures that rapidly become shiny should be ironed in
one direction with light pressure applied. Always keep the iron moving
at any moment.
•
Pure wool fabrics (100% wool) may be ironed with the iron set a steam
position. Preferably set steam control to the maximum position and use
a dry cloth as a mat.
•
Never iron over zip, rivet in the cloth. This will damage the soleplate.
3. Plug in the iron.
4. When the light has gone out, wait a while before you start ironing.
The temperature light will go on from time to time during ironing.
C. Using the appliance
▲ Steaming ironing
1. Make sure that there is enough water in the water tank.
2. Select the recommended ironing temperature (See chapter "Preparing
for use", section "Setting the temperature")
3. After the light has gone out, set the steam control to the appropriate
steam position.
•
Low steam(temperature setting from ●● to ●●●)
•
High steam (temperature setting from ●●● to MAX)
The iron will start steaming as soon as the set temperature has been
reached.
▲ Ironing without steam
1. Set the steam control to position
2. Select the recommended ironing temperature (See chapter "Preparing
for use", section "Setting the temperature")
(no steam)
18
Advertisement
Table of Contents
