Wiring Of Connectors; The Rechargeable Battery; General; Capacity And Lifetime - Look Solutions Tiny FX Operating Manual

5.5 Battery Status Display
The yellow LED [5] on the Tiny FX indicates (among other things (see point 7.2)) how
strong the battery still is and/or when it must be recharged.
1) LED flashes slowly:
Battery capacity of 15% – 100%, the battery is fully operational
2) LED flashes fast:
Battery capacity below 15% – the battery should be changed and/or charged.
3) LED lights up permanently:
The battery is flat

5.6 Wiring of Connectors

Mini-Stereo jack plug:
Sleeve = Ground, Ring = switch on/off, Tip = 11.1 V DC (+) output

6.1 General

The supplied battery is a maintenance-free 11.1V Lithium-Ion battery. It can be used
in any position.
The connection to the Tiny FX is established by a battery cable with a push-pull-
plug.
The connection to the charger is established by a low volt plug at the charger.

6.2 Capacity and Lifetime

The battery has a capacity of 1.5 Ah and is supplied in a 50% charged status.
Charge the battery before using it the first time with the supplied charger. Please
note the operating instructions of the charger (see point 7.1).
A fully-charged battery can generate more than 100 fog emissions of 4-5 seconds.
The permanent fogging time amounts to 10 minutes.
The battery will lose its capacity with use and will be wear out after approximately
two or three years.
5. Operating the Tiny FX
6. The Battery
11