Changing The Administrator Password; Figure 19: Change Password Dialogue Box; Procedure 15: Changing Administrator Password Using The Ems - Motorola Canopy T1/E1 User Manual

Canopy T1/E1 Multiplexer
2.5.2 Changing the Administrator Password
There is only one account for the Canopy T1/E1 Multiplexer—the administrator account.
The username may not be changed, however the password may be changed at any time.

Procedure 15: Changing Administrator password using the EMS

Use this procedure to change the password from the EMS.
1. Select File→Change password from the main menu.
RESULT: The Change Password dialogue box opens (shown in
2. Type the old password, then press Enter or Tab.
3. Type the new password, then press Enter or Tab.
4. Enter the new password again, then press Enter or Tab.
5. To accept, click Change.
To reject, click Cancel.
Issue 3

Figure 19: Change Password dialogue box

end of procedure
Page 48 of 73
T1/E1 Multiplexer FPGA Version 3.4
September 2004
Figure 19).