Canopy T1/E1 Multiplexer
Technical Specifications
The following tables list the technical specifications for the Canopy T1/E1 Multiplexer.
Specification
Ports
Compliance
Connector
T1 Data Rate
T1 Line Code
Line Impedance
Signal levels
Jitter Performance
Specification
Compliance
Framing
Signaling
Issue 3
Table 5: T1 port specifications
Description
1, 2, 3, and 4
ANSI T1.403
RJ-45, 8-pin
1.55 Mbps
B8ZS, AMI
Balanced: 100 ohms
Receive: 0 to -27 dB
Transmit: +2.7 v + 10%, adjustable, measured in range 0 to 655 feet.
AT&T TR-62411, G.824 Standards
Table 6: T1 framing specifications
Description
ANSI T1.403
D4, ESF (transparent)
CAS (Robbed bit signaling); CCS (transparent)
Table 7: E1 port specifications
Specification
Ports
Compliance
Connector
E1 Data Rate
E1 Line Code
Line Impedance
Signal levels
Jitter Performance
Page 16 of 73
T1/E1 Multiplexer FPGA Version 3.4
Description
1, 2, and 3
ITU-T G.703
RJ-45, 8-pin
2.048 Mbps
HDB3, AMI
Balanced: 120 ohms
Receive: Per G.703
Transmit: Per G.703
ITU-T G.823
September 2004