Mechanical Specifications; Electrical Specifications - Advantech MIO-2262 User Manual

Others
Ethernet
Serial ports
GPIO
1.2.3

Mechanical Specifications

1.2.3.1 Dimensions (mm)
L100 mm x W72 mm (3.9" x 2.8")
1.2.3.2 Height
Top Side: 17.3 mm (with PCB and heatsink); Bottom Side: 8.4 mm
1.2.3.3 Weight (g)
0.37g (0.82 lb, weight of total package)
1.2.4

Electrical Specifications

Power Supply Type: Single 12 V DC power input (needs power from carrier board
by 64-pin connector)
1.2.4.1 Power Supply Voltage
Single 12 V input ± 10%

Total peripheral power supply output: 5 V @ 3 A for CPU board and MIOe mod-

ule totally, 12 V @ 2 A for MIOe module
1.2.4.2 Power Consumption
Typical in Win7 Idle Mode:

N2600: 0.437 A @ +12 V (5.244 W)
N2800: 0.505 A @ +12 V (6.06 W)
 Max in Win7 HCT12 (10 minutes):
N2600: 0.671 A @ +12 V (8.052 W)
N2800: 0.817 A @ +12 V (9.804 W)
1.2.4.3 RTC Battery
 Typical Voltage: 3.0 V
 Normal discharge capacity: 210 mAh
MIO-2262 User Manual
 Controller: Intel® 82583V (GbE1)
 Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE
8023y, IEEE 802.ab
 Supports 10/100/1000 Mbps
 Support by 64-pin connector
Supports wake on LAN

 Controller: SMSC SCH 3114
 2 x RS-232 serial ports with ESD protection: air gap ± 15 kV,
contact ± 8 kV
 Controller: SMSC SCH 3114
8-Bit (programming) through Super I/O, pin header

 5 V tolerance
4