"Scan" Button (Scan Address Occupancy)
-
Click this button to get the addresses currently used by slave devices connected
to the SMBus.
-
The occupied addresses will be shown in the "Result (Hex)" text box. The
addresses are already in an 8-bit format (that means if your device has the
address 0x20 it will show 0x40).
V. Multi-byte IIC
Select the "Primary" or "SMBus-IIC" radio button. If one of them is not supported, its
radio button will be unavailable.
Primary
-
Connect the IIC devices to the IIC connector.
-
Type in the data bytes to be written in the "Input Data" text box.
-
The bytes read will be shown in the "Result" text box.
SMBus-IIC
-
Connect the IIC devices to the SMBus connector.
-
In AMD platforms, all the IIC functions are fully supported.
-
In Intel or VIA platforms, only Read and Write with "Read num" = 1 or "Write
num" = 1 are supported. "WR Combine" is not supported.
MIO-2262 User Manual
46