Beeper Signals - Motorola Symbol MS4404 Integration Manual

Correct
Imager Aiming Pattern: Bar Code Not Centered
Figure 3-3

Beeper Signals

The BPR* output line is provided for user feedback, and provides 50 mA drive capability for an external beeper.
The Symbol MS440X's beeper ranges from 2.352 KHz to 2.963 KHz. The beeper output is a 50% duty cycle
square wave at maximum volume, 12.5% at low volume.
Beeper Indications
Table 3-1
Event
Decode
Trigger is pulled
System bootup
Transmission error
Snapshot started
Snapshot completed
Entry error
Parameter entered
Defaults set
Scanner expects a number
No Decode message
Video mode is on
Video mode is off
Scanner wakeup
Incorrect
Beeper Indication
Middle Tone
No sound
Low Tone, Middle Tone, High Tone
Four Low Tones
Low Tone
Low Tone
Low Tone, High Tone
High Tone, Low Tone, High Tone, Low Tone
High Tone, Low Tone, High Tone, Low Tone
High Tone, Low Tone
No Sound
No Sound
No Sound
No Sound
Imaging 3 - 3