Setup Field(S) - Motorola Symbol LS3408 Product Reference Manual

Setup Field(s)

Setup Field(s) Definitions
Table 14-1
Parameter
Move Cursor
Move Cursor To a Character
Move Cursor to Start of Data
Move Cursor Past a Character
Skip Ahead "N" Characters
Skip Back "N" Characters
Send Preset Value
Description
Scan the Move Cursor To Character bar code on page
then any printable ASCII character from the
Keyboard. When this is used, the cursor moves to the position
after the matching character. If the character is not there, the rule
fails and ADF tries the next rule.
Scan this bar code to move cursor to the beginning of the data.
This parameter moves the cursor past all sequential occurrences
of a selected character. For example, if the selected character is
'A', then the cursor moves past 'A', 'AA', 'AAA', etc. Scan the
Move Cursor Past Character bar code on page
select a character from the
character is not there, the cursor does not move (i.e., has no
effect).
Scan one of these bar codes to select the desired number of
positions to move the cursor ahead.
Scan one of these bar codes to select the desired number of
positions to move the cursor back.
Send prefix and/or suffix value by scanning the appropriate bar
code. These values must be set using the Scan Prefix and Scan
Suffix bar codes on page 13-4.
Advanced Data Formatting 14 - 27
Alphanumeric
14-28, then
Alphanumeric Keyboard. If the
Page
14-28, 14-28
14-28
14-28
14-29
14-31
14-32