Code 11; Enable/Disable Code 11; Set Lengths For Code 11 - Motorola Symbol CS3000 Series Product Reference Manual

4 - 30 Symbol CS3000 Series Scanner Product Reference Guide

Code 11

Enable/Disable Code 11

Parameter # 0x0A
To enable or disable Code 11, scan the appropriate bar code below.

Set Lengths for Code 11

Parameter # L1 = 0x1C, L2 = 0x1D
The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s)
the code contains. Set lengths for Code 11 to any length, one or two discrete lengths, or lengths within a specific
range.
•
One Discrete Length - Select this option to decode only Code 11 symbols containing a selected length.
Select the length using the bar codes from
Code 11 symbols with 14 characters, scan Code 11 - One Discrete Length, then scan 1, then 4. To correct
an error or to change the selection, scan
•
Two Discrete Lengths - Select this option to decode only Code 11 symbols containing either of two
selected lengths. Select lengths using the bar codes from
to decode only Code 11 symbols containing either 2 or 14 characters, select Code 11 - Two Discrete
Lengths, then scan 0, 2, 1, and 4. To correct an error or to change the selection, scan
4-50.
•
Length Within Range - Select this option to decode a Code 11 symbol with a specific length range.
Select lengths using the bar codes from
11 symbols containing between 4 and 12 characters, first scan Code 11 - Length Within Range. Then
scan 0, 4, 1, and 2 (include a leading zero for single digit numbers). To correct an error or change the
selection, scan
•
Any Length - Scan this option to decode Code 11 symbols containing any number of characters within the
scanner's capability.
Enable Code 11
*
Numeric Bar Codes on page 4-48.
Cancel on page 4-50.
(0x01)
Disable Code 11
(0x00)
Numeric Bar Codes on page
Cancel on page 4-50.
Numeric Bar Codes on page
4-48. For example, to decode only
4-48. For example,
Cancel on page
For example, to decode Code