Surround - Contura C i41 Installation Instruction

Surround

Only handle the stone with clean hands or gloves. Handle the stone
carefully so as not to damage fragile corners and edges.
The stone is a natural material, which means that there may be
certain irregularities and variations in its appearance. Clean the
stone with a damp cloth. Soapy water can be used if necessary.
To avoid abnormally large gaps and uneven lines, it is important
that the stove and steel stand are straight and stable. Adjust and
align it carefully before hanging the stone. During assembly, check
Sections 3 and 4:
Height 370 mm.
Sections 3 and 4 consist of
similar panels.
Section 2:
Height 400 mm (not shelves / bench).
Height 450 mm (with shelves / bench).
Supplied packaged separately.
Section 1:
Height 450 mm.
Shims
F
E
F
E
D
C
B
A
that all the stone sections are straight and that all stones are of a
uniform height. Use shims if necessary.
!
After assembly is complete some adjustment of the insert feet
can improve the joint between the insert and the surround. The
internal fit of the stone can also be adjusted using the stand feet.
All feet must be contact with the base after any adjustment.
GB
229
SURROUND
G
G
H
B