Bluetooth Setup; Add A Cell Phone - AT&T TL96151 User Manual

Bluetooth

Bluetooth setup

To use a Bluetooth enabled cellular phone with your telephone, you must first
pair and connect your Bluetooth cellular phone with the telephone base. The
TL96151 can then be used to make or answer calls on the cell phone line.
Bluetooth wireless technology operates within a short range (up to 30 feet).
When you pair a Bluetooth cell phone or Bluetooth headset to the
telephone base, keep the device within 15 feet of the telephone base for
optimal performance.

Add a cell phone

Before you begin, make sure that you have cellular coverage and your
Bluetooth enabled cell phone is not connected to any other Bluetooth
device. Refer to your cell phone user's manual to learn how to search for or
add new Bluetooth devices.
To pair and connect a cell phone:
1. Press MENU
2. Press CID or
press SELECT
SELECT
3. Press
4. Press CID or
press SELECT. The screen displays Please wait...
followed by 1. If cell is connected to BT device,
please disconnect it.
• If there are already 4 paired devices on the device
list, the 4th one will be automatically removed,
regardless of whether the pairing of the new cell
phone is successful or not.
• If there are already 2 active devices on the
device list with prefix D1: or D2:, the telephone
base shows Only 2 devices can be ready for
connection. You are prompted to deactivate an
active device.
NEXT
5. Press
next to base.
• All devices that are connected to the telephone base are
disconnected until the pairing process completed.
NEXT
6. Press
screen displays Set cell to search base: AT&T DECT 6.0 discoverable
PIN: 0000. Promptly turn on the Bluetooth feature of your cell phone
and search for or add new devices.
on the telephone base in idle mode to enter the main menu.
DIR to highlight Bluetooth, then
.
to choose Add device.
DIR to highlight Add cellular, then
. The screen displays 2. Place cell phone
to turn on the telephone base discoverable mode. The
18
Directory
Cal ler ID log
Intercom
Bluetooth
BACK SELECT
BLUETOOTH
Add device
Device list
Download dir
BACK SELECT
ADD DEVICE
Add cel lular
Add headset
BACK SELECT
Set cel l to
search base:
AT&T DECT 6.0
discoverable
PIN:0000