Bluetooth Connection From Idle Mode - AT&T TL96151 User Manual

Bluetooth
Bluetooth setup
9. The screen displays Adding Headset A to
device list... when the base is connecting to
your headset.
10. When a device is successfully connected, the
telephone base displays Headset A is added and
connected to base. and the corresponding status
icon ( 1 or
corresponding light on the telephone base (DEVICE 1
or DEVICE 2) turns on.
If you have trouble pairing your headset, it may not be compatible with
your TL96151. Check the Bluetooth compatibility list at
www.telephones.att.com
NOTES:
• The pairing process may take up to one minute. If the pairing process fails, try again.
• When a connected headset is charging, it may disconnect from the telephone base and
the corresponding light on the telephone base (DEVICE 1 or DEVICE 2) turns off. For
some headset models, you may need to turn on the headset and reconnect it to the
telephone base again.
Auto connection
When an active device moves within Bluetooth range of the telephone base,
or is turned on within range, the telephone base tries to connect to the
device. When the device moves out of range, it is disconnected. Your device
might make a connect or disconnect sound.
A connected device could also be disconnected by:
• Turning off the Bluetooth device.
• Turning off the Bluetooth feature of the device.
• Disconnecting through the telephone base Device list. If you disconnect
through the Device list, the telephone base will not attempt to reconnect
until your device is moved out of range and then moves back in range again.

Bluetooth connection from idle mode

When you have active devices that are not connected,
on the telephone base in idle mode. Press
active device. When there are two active devices, the screen will prompt you
to choose one before connection.
2). You hear a confirmation tone. The
.
CONNECT
21
Adding
Headset A
to device
list...
Headset A
is added
and connected
to base.
CONNECT appears
to start connecting an