Installation Options; Tabletop To Wall-Mount Installation - AT&T TL96151 User Manual

Getting started

Installation options

Your telephone base is ready for tabletop use. If you want to mount your
telephone on a wall, follow the steps to connect the telephone base with
a standard dual-stud telephone wall-mounting plate. You may need a
professional to install the wall-mounting plate.

Tabletop to wall-mount installation

1. Unplug the power adapter from the power outlet.
Unplug the telephone line cord from the wall jack (or
DSL filter). Make sure the telephone line cord and the
power cord are routed through the grooves at the
bottom of the telephone base, accordingly.
2. Press down on the tabs of the wall-mount bracket,
as indicated, to release it from tabletop orientation.
3. Rotate the wall-mount bracket down and push it into
the telephone base until it clicks into place.
4. Plug the telephone line cord (or DSL filter) into
the wall jack. Plug the power adapter into a
power outlet not controlled by a wall switch.
Align the slots on the back of the telephone
base with the studs of the wall-mounting
plate. Make sure the telephone line cord
does not get caught between the
wall-mount plate and the telephone base.
14