Getting started
Battery installation and charging
Install the battery, as shown below.
1. Plug the battery connector securely into the socket inside the handset
battery compartment, matching the color-coded label. Insert the supplied
battery with the label THIS SIDE UP facing up, as indicated.
2. Align the cover flat against the battery compartment, then slide it upwards
until it clicks into place.
CHARGE light
IMPORTANT INFORMATION:
•
Use only the supplied rechargeable battery or replacement battery (model BT183342/
BT283342). To order, visit our website at
1 (800) 222-3111
•
If you do not use the handset for a long time, disconnect and remove the battery to prevent
possible leakage.
3. Charge the handset by placing it face forward in the
telephone base or charger. The CHARGE light is on
when charging.
To replace the battery, press the tab and slide the
battery compartment cover downwards. Lift out the
old battery and disconnect it from the handset. Follow
the instructions to install and charge the new battery.
www.telephones.att.com
. In Canada, dial
12
1 (866) 288-4268
or call
.