Main Rotor Pitch Adjustment; Final Check - Kyosho NEXUS 30 S Instruction Manual

48
Main Rotor

Main rotor pitch adjustment

Center the throttle control stick. Slide the pitch
gauge onto each blade. Adjust the length of both
pitch rods to make the stabilizer bar run parallel to
the hover pitch line on the gauge.
Move the throttle control stick to high and set with
your transmitter a high pitch.
Move the throttle contol stick to low and set with
your transmitter a low pitch.
Pitch reference table
Stick Position
Hovering
Normal Flight
Loop / Stall Turns
Roll
Autorotation
49

Final Check

Check all parts.
Examine all screws, etc. for their
tightness.
Examine sticks and servos for
adequate movement.
Examine linkage rods for smooth
movement.
Assemble in the specified order.
24
Low Center High
0û 6û 10û
-2û 6û 9û
-3û 4û 9û
-5û 2û 9û
-2~ -3û 6û 12û
HOVER-PITCH (6û)
Hover Pitch
Neutral
HI-PITCH (10û)
High Pitch
High
LOW-PITCH (0û)
PITCH GAUGE
R
THE FINEST RADIO CONTROL MODELS
Low Pitch
Low
The tail rotor will not rotate if the set screw is loose!
The tail drive check hole allows you to check the set
screw for proper tightness! Check before evey flight.
Pitch Rod
PIT.CURVE
HI LOW
PIT.CURVE
HI LOW