Parts Replacement; Engine Replacement; Clutch Bell Replacement; Tail Drive Coupling Replacement/Mast Replacement - Kyosho NEXUS 30 S Instruction Manual

Parts Replacement (1)

Engine
1
2
1 Remove the fuel tubes, throttle linkage and muffler.
2 Unscrew the engine mounting screws and pull the engine from
below.
2
Clutch Bell
1
2
3
1 Remove the starter cone.
2 Unscrew the upper screws (4 pcs.) fastening the servo frame
and pull out the servo frame towards the front.
3 Unscrew the screws fastening the starter bearing case and pull
it out together with the clutch bell.
1
2
Tail Drive Coupling
Thinner than the pin.
1
3
Pin
Mast
1
2
3
Remove the pitch lever.
1
2 Detach the elevator links from the swashplate.
3 Unscrew the screws fastening the top ball bearing case and
main gear housing and pull out the
mast from above.
2
1
4
4 Unscrew the screws holding the mast stopper and pull
out the mast.
5
5 While pressing the pitch rods together, pull out the specified
parts from below.
3
2
Mast Stopper
Mast
33