Checklist before flying
1
STARTING THE ENGINE (1)
Charging radio batteries
1
With rechargeable radio batteries, charge them to full capacity.
With dry cells used in the transmitter, replace them with new ones.
Checking the helicopter
2
Ensure that all screws, nuts, etc. are securely tightened.
Refuelling
3
When filling up the tank, ensure that no dirt enters the tank
as well.
Basic Needle Setting
4
Entirely tighten the needle, then unscrew it as many turns as specified
in the engine instruction manual.
5
Pull down the engine control stick and center the engine control trim.
With radio glitches or a helicopter that will not ÒmoveÓ, find out
the reason. Do not start the engine before finding and solving
the problem!
Radio Activation
1
2
3
Center the trim.
1
With
, the main rotor pitch
becomes smaller.
With
, the main rotor pitch
becomes bigger.
With
, the swashplate tilts right.
With
, the swashplate tilts left.
With
, the swashplate tilts back.
With
, the swashplate tilts fore.
With
, the slide ring moves left.
With
, the slide ring moves right.
2
Pull down the en-
gine control stick.
Switch on.
27