Aileron Linkage; Throttle Linkage - Kyosho NEXUS 30 S Instruction Manual

cm
37

Aileron Linkage

4.8mm
10
Ball End
2 100mm
412
Adjuster Rod
38

Throttle Linkage

4.8mm
10
Ball End
2 109mm
411
Adjuster Rod
About 13mm
Part bags used.
20
NE-8
1
1
91mm
about 91mm
10mm
About 10mm
NE-8
1
Choose the appropriate hole in the servo horn and adjust with
so the throttle lever will travel most when the throttle control servo is in high or low throttle positions.
1
Ensure the throttle servo moves into the correct direction! If it moves into the
WARNING :
opposite direction, the main rotor will rotate at high rpm when starting the engine.
This is dangerous as it may result in damages and, worse, serious accidents!
13mm
Must be purchased separately!
Left Right
Vertical
Low High
10
the length of the throttle linkage
10
Cut off shaded portion.
Neutral
10
412
Throttle Lever
10
411