Motorola Netopia 3397GP Administrator's Handbook page 49

Define Custom Service
To configure a Custom Service, choose whether to use Port Forwarding or Trigger Ports.
❑ Port Forwarding forwards a range of WAN ports to an IP address on the LAN.
❑ Trigger Ports forwards a range of ports to an IP address on the LAN only after specific outbound
traffic "triggers" the feature.
Click the Next button.
If you chose Port Forwarding, the Port Range entry screen appears.
Port Forwarding forwards a range of WAN ports to an IP address on the LAN. Enter the following infor-
mation:
❑ Service Name: A unique identifier for the Custom Service.
❑ Global Port Range: Range of ports on which incoming traffic will be received.
❑ Base Host Port: The port number at the start of the port range your Gateway should use when for-
warding traffic of the specified type(s) to the internal IP address.
❑ Protocol: Protocol type of Internet traffic, TCP or UDP.
Next
Click the button.
If you chose Trigger Ports, the Trigger Ports entry screen appears.
49