Yamaha XVS1300A 2007 Service Manual page 69

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
1. Clutch switch lead
2. Clutch cable
3. Left handlebar switch lead
4. Right handlebar switch lead
5. Front brake hose
6. Throttle cable (accelerator cable)
7. Throttle cable (decelerator cable)
8. Front brake switch lead
9. Radiator fan motor lead
10. Fuel tank overflow hose
11. Starter motor lead
12. Starter motor
13. Rear brake light switch
14. Horn
15. Rear brake light switch lead
16. Horn lead
17. Radiator fan motor
18. Sidestand switch lead
19. Sidestand switch
A. Pass the clutch cable and left handlebar switch
lead through the guide, making sure to route the
lead to the outside of the cable.
B. Pass the throttle cables and right handlebar switch
lead through the guide, making sure to route the
lead to the outside of the cables.
C. Fasten the starter motor lead securely to the
engine mounting boss with a plastic locking tie,
making sure that the tie does not contact the
engine bracket on the frame.
D. Pass the front brake hose through the guide.
E. Fit the rubber strap end without the tab onto the
holder, wrap the strap around the front brake hose
and holder, and then fit the end with the tab onto
the holder, making sure to face the tab downward.
– °
F. 30 50
G. Install the front brake hose with its paint mark
facing forward.
H. Route the sidestand switch lead over the shift rod.
email: info@motomatrix.co.uk
2-44
CABLE ROUTING