Installing The Fuel Pump; Installing The Fuel Tank Hoses - Yamaha XVS1300A 2007 Service Manual

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
EAS3D81007

INSTALLING THE FUEL PUMP

1. Install:
• Fuel pump
Fuel pump bolt
4 Nm (0.4 m·kg, 2.9 ft·lb)
NOTE:
• Do not damage the installation surfaces of the
sub-fuel tank when installing the fuel pump.
• Always use a new fuel pump gasket.
• Install the fuel pump as shown in the illustra-
tion.
• Align the projection "a" on the fuel pump with
the slot in the fuel pump bracket and the inden-
tation "b" in the sub-fuel tank.
• Tighten the fuel pump bolts in the proper tight-
ening sequence as shown.
b
3
FWD
2
2. Install:
• Fuel hose
ECA3D81002
CAUTION:
When installing the fuel hose, make sure that
it is securely connected, and that the fuel
hose connector cover on the fuel hose is in
the correct position, otherwise the fuel hose
will not be properly installed.
NOTE:
• Install the fuel hose securely onto the fuel
pump until a distinct "click" is heard.
email: info@motomatrix.co.uk
1
5
1
a
4
6
• To install the fuel hose onto the fuel pump,
slide the fuel hose connector cover "1" on the
end of the hose in the direction of the arrow
shown.
1
EAS3D81040

INSTALLING THE FUEL TANK HOSES

1. Install:
• Fuel tank breather hose (fuel tank to hose
joint) "1"
• Fuel tank overflow hose "2"
NOTE:
Install the fuel tank overflow hose and fuel tank
breather hose (fuel tank to hose joint) as shown
in the illustration, making sure that they are not
pinched by the fuel tank "3".
7-5
FUEL TANK
3
2
1