Assembling The Front Wheel; Adjusting The Front Wheel Static Balance - Yamaha XVS1300A 2007 Service Manual

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
4. Check:
• Wheel bearings
Front wheel turns roughly or is loose → Re-
place the wheel bearings.
• Oil seals
Damage/wear → Replace.
EAS21960

ASSEMBLING THE FRONT WHEEL

1. Install:
• Wheel bearings
• Oil seals New
M MMM M MMM M M MMM M
a. Install the new wheel bearings and oil seals in
the reverse order of disassembly.
ECA3D81004
CAUTION:
Do not contact the wheel bearing inner race
"1" or balls "2". Contact should be made
only with the outer race "3".
NOTE:
Use a socket "4" that matches the diameter of
the wheel bearing outer race and oil seal.
email: info@motomatrix.co.uk
New
M MMM M M MMM M M MMM M
L LLL L LLL L
EAS21970
ADJUSTING THE FRONT WHEEL STATIC
BALANCE
NOTE:
• After replacing the tire, wheel or both, the front
wheel static balance should be adjusted.
• Adjust the front wheel static balance with the
brake discs installed.
1. Remove:
• Balancing weight(s)
2. Find:
• Front wheel's heavy spot
NOTE:
Place the front wheel on a suitable balancing
stand.
M MMM M MMM M
a. Spin the front wheel.
b. When the front wheel stops, put an "X
at the bottom of the wheel.
MMM
c. Turn the front wheel 90° so that the "X
is positioned as shown.
d. Release the front wheel.
e. When the wheel stops, put an "X
the bottom of the wheel.
4-10
FRONT WHEEL
L LLL L L LLL L L LLL L L LLL
M MMM M M MMM M M MMM M M MMM
2
L LLL
M MMM
" mark
1
" mark
1
" mark at