Removing The Front Fork Legs; Disassembling The Front Fork Legs - Yamaha XVS1300A 2007 Service Manual

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
EAS22960

REMOVING THE FRONT FORK LEGS

The following procedure applies to both of the
front fork legs.
1. Stand the vehicle on a level surface.
EWA13120
WARNING
Securely support the vehicle so that there is
no danger of it falling over.
NOTE:
Place the vehicle on a suitable stand so that the
front wheel is elevated.
2. Loosen:
• Lower bracket pinch bolts
EWA3D81004
WARNING
Before loosening the lower bracket pinch
bolts, support the front fork leg.
EAS22980

DISASSEMBLING THE FRONT FORK LEGS

The following procedure applies to both of the
front fork legs.
1. Drain:
• Fork oil
NOTE:
Stroke the outer tube several times while drain-
ing the fork oil.
2. Remove:
• Dust seal "1"
• Oil seal clip "2"
(with a flathead screwdriver)
ECA14180
CAUTION:
Do not scratch the inner tube.
email: info@motomatrix.co.uk
3. Remove:
• Damper rod bolt "1"
• Copper washer
NOTE:
While holding the damper rod with the damper
rod holder "2" and T-handle "3", loosen the
damper rod bolt.
Damper rod holder
90890-01460
T-handle
90890-01326
T-handle 3/8" drive 60 cm long
YM-01326
4. Remove:
• Inner tube
M MMM M MMM M M MMM M
a. Hold the front fork leg horizontally.
b. Securely clamp the brake caliper bracket in a
vise with soft jaws.
c. Separate the inner tube from the outer tube
by pulling the inner tube forcefully but careful-
ly.
ECA14190
CAUTION:
• Excessive force will damage the oil seal
and bushing. A damaged oil seal or bush-
ing must be replaced.
• Avoid bottoming the inner tube into the out-
er tube during the above procedure, as the
oil flow stopper will be damaged.
4-51
FRONT FORK
M MMM M M MMM M M MMM M MMM