Replacing Battery - Toyota 2008 Tundra Owner's Manual

Hide thumbs Also See for 2008 Tundra:
Table of Contents

Advertisement

07 11.20
—Activating alarm
XS12036
Holding the "
" (alarm) switch blows
the horn intermittently and flashes the
headlights, tail lights, turn signal lights,
interior light and personal lights.
The "
" switch is used to deter vehicle
theft when you witness anyone attempting
to break into or damage your vehicle.
The alarm will last for one minute. To stop
alarm midway, push the "
" switch once
again, lock or unlock a door with transmit-
ter, or turn the engine switch from the
"LOCK" to "ON" position.
The alarm does not work when the engine
switch is in the "ON" position.

—Replacing battery

For replacement, use a CR2032 lithium
battery or equivalent.
CAUTION
Special care should be taken to pre-
vent small children from swallowing
the removed transmitter battery or
components.
NOTICE
z When replacing the battery, be care-
ful not to lose the components.
z Replace
only
with
the
same
equivalent type recommended by a
Toyota dealer.
z Dispose of used batteries according
to the local laws.
Replace the transmitter battery by follow-
ing these procedures:
LS12017
1. Using a coin or equivalent, open the
or
transmitter case.
2008 TUNDRA from Apr. '08 Prod. (OM34477U)
25

Advertisement

Table of Contents
loading

Table of Contents