Toyota 2008 Tundra Owner's Manual page 262

07 11.20
The vehicle stability control system au-
tomatically turns off, and the "VSC
OFF" indicator light is illuminated,
when the four−wheel drive mode is set.
The "VSC OFF" indicator light comes on
for a few seconds when the engine switch
is turned to the "ON" position, and then
turns off. If the four−wheel drive mode is
set, the indicator light is illuminated again.
252
XS17046
When getting the vehicle out of mud or
newly fallen snow, etc., it may be bene-
ficial to turn off the vehicle stability
control system. This system which also
controls engine performance interferes
with the process of freeing the rear
wheels (two−wheel drive models).
To turn off the vehicle stability control
system: Push and hold the "VSC OFF"
switch for 3 seconds or more with the
vehicle stopped. The vehicle stability
control system turns off and the "AUTO
LSD" mode turns on.
The "AUTO LSD", slip indicator and "VSC
OFF" lights will come on.
When you push and hold the "VSC OFF"
switch for 3 seconds or more with the
vehicle stopped, the "AUTO LSD" mode
turns off and the "VSC OFF" mode turns
on.
After the indicator light turns off, the "VSC
OFF" and slip indicator lights will come
on.
"VSC OFF" mode can turn off the fol-
lowing systems:
Vehicle stability control system
D
Traction control system
D
"AUTO LSD" system (two−wheel drive
D
mode)
Active traction control system (four−
D
wheel drive mode)
To turn on: Briefly push the "VSC OFF"
switch once again.
The "VSC OFF" and slip indicator lights
will go off.
If the engine is turned off while the "VSC
OFF" and slip indicator lights are on and
then restarted, the indicator lights will turn
off automatically.
2008 TUNDRA from Apr. '08 Prod. (OM34477U)