Toyota 2008 Tundra Owner's Manual page 202

07 11.20
—Odometer and two trip
meters
XS16013d
Normal display
XS16014c
Zoom display
192
This meter displays the odometer and
two trip meters.
Selecting the zoom display
odometer and trip meter allows the
odometer and one of the trip meters to
be displayed simultaneously.
1. Odometer—Shows the total distance
the vehicle has been driven.
2. Two trip meters—Show two different
distances independently driven since
the last time each trip meter was set
to zero.
You can use one trip meter to calculate
the fuel economy and the other to
measure the distance on each trip. All
trip meter data is cancelled if the elec-
trical power source is disconnected.
3. Trip meter reset knob—Resets the two
trip meters to zero, and also changes
the meter display.
To change the meter display, quickly
push and release the knob. The meter
display changes in the order from the
odometer to trip meter A to trip meter
B, then back to the odometer each
time you push.
To reset trip meter A to zero, display
the meter A reading, then push and
hold the knob until the meter is set to
of the
zero. The same process can be applied
for resetting trip meter B.
2008 TUNDRA from Apr. '08 Prod. (OM34477U)