Vehicle Stability Control System - Toyota 2008 Tundra Owner's Manual

07 11.20
The "VSC OFF" indicator light flashes
D
and the slip indicator light comes on
while driving.
CAUTION
Do not drive with the "AUTO LSD"
system continuously turned on.
250
Vehicle stability control
system (two−wheel drive mode
only)
The vehicle stability control
helps provide integrated control of sys-
tems such as the anti−lock brake sys-
tem, traction control, engine control,
etc. This system automatically controls
the output of the brakes or engine to
help prevent the vehicle from skidding
when cornering on a slippery road sur-
face or when the steering wheel is op-
erated abruptly.
The vehicle stability control system is acti-
vated when the vehicle speed is more
than 15 km/h (9 mph).
You may hear a sound in the engine
compartment for a few seconds when the
engine is started or just after the vehicle
begins to move. This means that the sys-
tem is in self−check mode, but does not
indicate a malfunction.
system
CAUTION
Do not rely excessively on the ve-
D
hicle stability control system. Even
if the vehicle stability control sys-
tem is operating, you must always
drive carefully and attentively to
avoid serious injury. Reckless driv-
ing will result in an unexpected ac-
cident. If the slip indicator light
blinks and an alarm sounds, special
care should be taken while driving.
Only use tires of specified size. The
D
size, manufacturer, brand and tread
pattern for all 4 tires should be the
same. If you use the tires other
than specified, or different type or
size, the vehicle stability control
system may not function correctly.
When replacing the tires or wheels,
contact your Toyota dealer. (See
"Checking and replacing tires" on
page 556 in Section 7−2.)
2008 TUNDRA from Apr. '08 Prod. (OM34477U)