Toyota 2008 Tundra Owner's Manual page 34

Hide thumbs Also See for 2008 Tundra:
Table of Contents

Advertisement

07 11.20
To lock and unlock all doors, push the
switches of the transmitter slowly and
securely.
To lock: Push the "
" (lock) switch. All
the doors are locked simultaneously. At
this time one beep will be heard, and the
turn signal lights flash once.
Check to see that all the doors are se-
curely locked after locking.
If any of the doors is not securely closed,
locking cannot be performed by the "
(lock) switch and a beep will sound con-
tinuously for 10 seconds. However, if the
key is in the engine switch, a beep will
not sound.
To stop the beep, close all the doors se-
curely or push the "
" (unlock) switch.
The beep and flashing turn signal lights
can
be
disabled.
If
your
vehicle
equipped with the multi−information display
(For
further
information,
"Multi−information display" on page 187 in
Section 1−6.), these can be changed by
yourself. For details, contact your Toyota
dealer.
24
To unlock: Push the "
" (unlock) switch
once to unlock the driver's door alone.
Pushing the switch twice within 3 seconds
unlocks all the doors simultaneously. Each
time the "
" (unlock) switch is pushed,
two beeps will be heard, and the turn
signal lights flash twice.
This double switch operation to unlock all
the doors can be changed to a single
switch
operation.
If
your
equipped with the multi−information display
"
(For
further
information,
"Multi−information display" on page 187 in
Section 1−6.),
it
can be
yourself. For details, contact your Toyota
dealer.
When you unlock all the doors using the
wireless remote control, the Illuminated
entry
system,
interior
lights,
lights and cargo lamp will be activated.
is
(For
further
information,
lights" on page 170, "Personal lights" on
see
page 171, "Illuminated entry system" on
page 173 and "Cargo lamp" on page 174
in Section 1−5.)
You have 60 seconds to open a door after
using the wireless remote unlock feature.
If a door is not opened by then, all the
doors will be automatically locked again.
The time for automatic door lock function
can
be
changed.
equipped with the multi−information display
(For
further
"Multi−information display" on page 187 in
Section 1−6.),
it
yourself. For details, contact your Toyota
dealer.
If the "
" (lock) or "
is kept pressed in, the locking the unlock-
vehicle
is
ing operation is not repeated. Release the
switch and then push again.
see
changed by
personal
see
"Interior
2008 TUNDRA from Apr. '08 Prod. (OM34477U)
If
your
vehicle
is
information,
see
can be
changed by
" (unlock) switch

Advertisement

Table of Contents
loading

Table of Contents