Toyota 2008 Tundra Owner's Manual page 273

07 11.20
CAUTION
To avoid accidentally engaging the
cruise control, turn the system off
when it is not in use. Make sure the
"CRUISE" indicator light is off.
XS17023
SETTING THE CRUISING SPEED
5−speed models—The transmission must
be in the "D" position or the shift range
position must be in "4" (fourth range) or
"5" (fifth range) in "S" mode before you
set the cruising speed.
6−speed models—The transmission must
be in the "D" position or the shift range
position must be in between "4" (fourth
range) and "6" (sixth range) in "S" position
before you set the cruising speed.
Bring your vehicle to the desired speed,
push the lever down in the "−SET" direc-
tion and release it. This sets the vehicle
at that speed. If the speed is not satisfac-
tory, tap the lever up for a faster speed,
or tap it down for a slower speed. Each
tap changes the set speed by 1.6 km/h
(1.0 mph). You can now take your foot off
the accelerator pedal.
If you need acceleration—for example,
when passing—depress the
pedal enough for the vehicle to exceed
the set speed. When you release it, the
vehicle will return to the speed set prior
to the acceleration.
CANCELLING THE CRUISE CONTROL
The cruise control may be temporarily
cancelled by the driver or by the system
itself under certain circumstances. Tempo-
rary cancellation allows the set cruising
speed to remain in memory.
The cruise control can be temporarily can-
celled by doing the following:
Pulling the lever in the "CANCEL" di-
D
rection and releasing it
Depressing the brake pedal
D
Under certain circumstances, the cruise
control is temporarily cancelled:
2008 TUNDRA from Apr. '08 Prod. (OM34477U)
accelerator
263