Toyota 2008 Tundra Owner's Manual page 156

07 11.20
XS13200
2. Open the anchor bracket cover with
the symbol as shown in the illustra-
tion.
146
XS13210
3. Pull the seatback release lever and
swing the seatback forward slightly,
then latch the hook onto the anchor
bracket. Return the seatback to its
original position.
Fix the child restraint system with
the seat belt and tighten the top
strap.
For instructions on installing the child re-
straint system, see "Child restraint" on
page 115 in this Section.
CAUTION
When returning the seatback to its
D
original position, make
seatback is securely locked
pushing forward and rearward on
the top of the seatback. Failure to
do so will prevent the seat belt
from operating properly.
Make sure the top strap is securely
D
latched, and check that the child
restraint system is secure by push-
ing and pulling it in different direc-
tions. Follow all the installation in-
structions provided by its manufac-
turer.
2008 TUNDRA from Apr. '08 Prod. (OM34477U)
sure the
by