Toyota 2008 Tundra Owner's Manual page 282

07 11.20
1 2 3 4 5 6 (Preset buttons)
These buttons are used to preset and
tune in radio stations.
To preset a station to a button: Tune in
the desired station. (See "TUNE·FILE" or
"SEEK/TRACK".) Push and hold down the
button until you hear a beep—this will set
the station to the button. The preset but-
ton number will appear on the display.
To recall a preset station: Push the button
for the station you want. The preset but-
ton number and station frequency will ap-
pear on the display.
This radio can store one AM and two FM
stations for each button. (The display will
show "AM", "FM1" or "FM2" when you
push "AM", "FM1" or "FM2" button.)
(Eject button)
Push the compact disc eject button to
eject a compact disc.
272
(Reverse/Fast−forward button)
Push and hold " " (preset button 6) or
" " (preset button 5) to fast forward or
reverse within a compact disc. When you
release the button, the compact disc play-
er will resume playing.
AM
Push the "AM" button to turn on the radio
and select the AM band. "AM" will appear
on the display.
AUDIO/CONTROL (Tone and sound bal-
ance adjustment function)
Each time you push
"AUDIO/CONTROL" knob, the
changes. To adjust the tone and balance,
turn the knob.
BAS: Adjusts low−pitched tones. The dis-
play ranges from −5 to 5.
TRE: Adjusts high−pitched tones. The dis-
play ranges from −5 to 5.
FAD: Adjusts the sound balance between
the front and rear speakers. The display
ranges from F7 to R7.
BAL: Adjusts the sound balance between
the right and left speakers. The display
ranges from L7 to R7.
Switching over the Speed Automatic
Sound Levelizer (ASL) level
ASL: The Automatic Sound Levelizer can
be turned on by turning the knob. In addi-
tion, turning the knob allows you to select
from LOW, MID, and HIGH volume and
tone settings. The ASL system automati-
cally adjusts volume and tone in accor-
dance with the driving speed. This helps
ensure an optimal listening experience
even if noise levels rise while driving.
DISC·AUX (Compact disc)
Push the "DISC·AUX" button to play a
compact disc.
the
When the audio system is set into com-
mode
pact disc operation, the display shows the
track number currently being played.
To switch between CD and AUX (external
device) modes, press the "DISC·AUX" but-
ton. The AUX mode is only available when
AUX adapter is connected to the system.
When the AUX adapter is in use, "AUX"
will appear on the display.
Error messages
If the player malfunctions, your audio sys-
tem will display following error messages.
"WAIT": The compact disc player unit
may be too hot. Allow the player to cool
down.
2008 TUNDRA from Apr. '08 Prod. (OM34477U)