Time Projection; Listening To The Radio - Jensen JCR-235 User Manual

SNOOZE FUNCTION
When the alarm source is sounding, press the SNOOZE button to suspend the alarm and activate
the snooze function. Alarm will temporarily stop and will sound again 9 minutes later but the
ALARM or and SNOOZE INDICATORS will keep flashing.
Notes:
• This manual snooze operation can be repeated again and again for a maximum of 5 times.
• To turn off the snooze function when it activates, tap the corresponding ALARM button or the
button. The flashing SNOOZE INDICATOR goes off.
1. Turn "On" or "Off" the projector with the PROJECTION button.
2. Project the time on a light/flat surface such as the ceiling.
3. Swivel the projector to position the projected time as desired.
4. If necessary, you may invert the projected time 180º with the INVERT button, so it displays
properly.
Note: If "AM" is displayed, the projected time is morning time.
RADIO TUNING
1. Press the POWER/STANDBY
2. Tap the MODE
will light up.
AUTOMATIC SEARCH FOR RADIO STATIONS
To automatically search for stations with strong signals, press and hold the TUNING DOWN
UP button until frequency readout on the display begins to scan and then release the button.
The tuner will stop on the first strong station it finds.
MANUAL SEARCH FOR RADIO STATIONS
1. Tap the or
2. Tap the VOLUME
will appear on the LED DISPLAY.
Notes:
• Use manual tuning to select weaker stations that might be skipped during automatic tuning.
• If the automatic tuning does not stop on the exact frequency of the station, for example, it stops
on 88.9 MHz instead of 88.8 MHz, use the manual tuning method to "fine tune" to the exact
frequency of the desired station.

TIME PROJECTION

LISTENING TO THE RADIO

button to turn on the unit.
button repeatedly to select the AM or FM band. The corresponding indicator
button repeatedly to choose your desired radio station.
or button to set the desired volume level. The volume level setting
GB - 7
or