Alarm Operation; Setting The Wake Up Time; Wake To Radio - Jensen JCR-210 User Manual

5. Tape the MODE button to change to other operation mode or press and hold the
button to turn off the unit.

SETTING THE WAKE UP TIME

1. In unit standby mode, press and hold the ALARM 1
corresponding alarm clock display will start flashing.
2. Tap the HOUR button repeatedly to set alarm hour. Press and hold the button for
fast advance setting.
3. Tap the MINUTE button repeatedly to set alarm minute. Press and hold the button
for fast advance setting.
4. Tap the corresponding alarm button
Note:
The PM INDICATOR is located in the top left corner of the clock display. Make sure
you check that the PM indicator is set correctly for AM or PM. If the PM indicator is 'On',
the alarm time will be "PM". If not, the alarm time will be "AM".
CHECKING THE WAKE UP TIME
To check the wake up time, simply press and hold ALARM BUTTON
standby mode, the display will change from current time to wake up time and flashing
for 10 seconds then return to the current time.

WAKE TO RADIO

1. In unit standby mode, tap the corresponding alarm button
until associated wake to music (radio) indicator
2. At the selected wake up time, the radio will turn 'On' automatically. The volume level
of the AM or FM radio increases gradually until it reaches the factory preset level.
The radio will play for about one hour and then shut off automatically.
Notes: 1.) You must tune to your desired AM or FM radio station first before
3. To stop the music (radio) alarm before it shuts off automatically, tap the
/MODE/ALARM OFF button or the Volume +/- buttons to stop the Radio from
playing. The radio will stop but the music alarm remains set and will turn the radio
on again at the same time on the following day.
4. If you do not want the music alarm to turn on the following day, tap the corresponding
alarm button
goes off from display.

ALARM OPERATION

starting to set the wake to music (radio) alarm.
2.) If you set the wake to music alarm in AUX IN mode, it will
automatically switch to beeping alarm at selected wake up time.
or repeatedly until associated alarm indicator
or to finish the setting.
E-8
or ALARM 2
or repeatedly
or turns ON.
button,
or in
or