Related Manuals for Jensen JCR-208A
Summary of Contents for Jensen JCR-208A
- Page 1 AM/FM DUAL ALARM CLOCK RADIO WITH NATURE SOUNDS USER MANUAL JCR-210 Please read and follow this instruction manual carefully before using the unit and retain it for future reference...
-
Page 2: Important Safety Instructions
WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. - Page 3 13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
-
Page 4: Important Notes
Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. -
Page 5: Location Of Controls And Indicators
If the unit is not to be used for an extended period of time, remove the batteries. Old or leaking batteries can cause damage to the unit and may void the warranty. Do not dispose of batteries in fire, batteries may explode or leak. Batteries shall not be exposed to excessive heat such as sunshine, fire or the like. -
Page 6: Standby Mode
1. TIME SET/MEMORY/M+ BUTTON 12. MUSIC (RADIO) ALARM 1 INDICATOR 2. HOUR SET/ TUNE BUTTON 13. BEEPING ALARM 2 INDICATOR 3. MINUTE SET/ TUNE BUTTON 14. MUSIC (RADIO) ALARM 2 INDICATOR 4. NATURE SOUND REPEAT ALL BUTTON 15. SPEAKER 5. -
Page 7: Setting The Clock
Standby Mode is when the unit is first plugged into an AC power source (display flashing), or after all the settings have been made and the time is showing on the display. The radio and nature sounds are off, no buttons are pressed and no alarms are sounding. SETTING THE CLOCK When you connect the radio to an AC outlet for the first time the clock display will begin flashing "12:00". - Page 8 Manual tune to select weaker stations that might be skipped during automatic tuning. If the automatic tuning does not stop on the exact frequency of the station, for example, it stops on 88.9 MHz instead of 88.8 MHz, use the manual tuning method to “fine tune”...
-
Page 9: Alarm Operation
be play one by one repeatedly. 5. Tape the MODE button to change to other operation mode or press and hold the button to turn off the unit. ALARM OPERATION SETTING THE WAKE UP TIME 1. In unit standby mode, press and hold the ALARM 1 or ALARM 2 button, corresponding alarm clock display will start flashing. -
Page 10: Sleep Operation
associated beeping alarm indicator turns ON. 2. At the selected wake up time, the beeping alarm will sound and continue for about one hour and then shut off automatically. 3. To stop the alarm, tap the ALARM OFF button once. The alarm will stop but the alarm remains set and will turn on the alarm on again at the same time the following day. -
Page 11: Aux In Operation
1. To activate the sleep timer, turn the unit on and tap the MODE button to select AM, FM radio, nature sound or listening to music via AUX IN. 2. Tap the SLEEP button and the sleep time appears on the display. 3. -
Page 12: Specifications
use dusting sprays or polishes on the cabinet. If the cabinet becomes dirty or smudged with fingerprints it may be wiped with a soft cloth that has been slightly dampened with a mild soap and water solution. To prevent fire or shock hazard, always disconnect the power cord from the AC outlet before cleaning. - Page 13 at SPECTRA’s expense. There are no other express warranties other than those stated herein. This warranty is valid only in accordance with the conditions set forth below: The warranty applies to the SPECTRA product only while: It remains in the possession of the original purchaser and proof of purchase is demonstrated.