Voice Features; Abbreviated Dialing - AT&T 8434 User Manual

Abbreviated Dialing (AD)
To program/reprogram
an AD button
Note: AD buttons must
first be assigned by your
System Manager.
To place a call using an
AD button

Voice Features

1 On a separate sheet of paper, jot down the outside
numbers, extensions, and/or feature codes you want
to program
Note: Each AD button will hold one complete phone
number or feature code.
2 Pick up handset
Note: If you are using the built-in speakerphone, you
must press a call appearance button, before you
proceed to Step 3.
3 Press [ ] (if this button has been assigned to
Program
your voice terminal)
or Dial Program code
Press [ ] to be programmed
4
AD xxxxx
5 Dial outside number, extension, or feature code you
want to program (up to 24 digits)
Note: If you are programming an outside number, be
sure to include a trunk code, if applicable.
6 Press [ ] (on the dial pad) or [
#
are programming
Number is stored
Repeat Steps 4-6 to program additional buttons
Hang up to end programming
7
Press selected [
1
AD xxxxx
Call is dialed (silently)
[dial tone]
[dial tone]
[dial tone]
] that you
AD xxxxx
[confirmation tone], [dial tone]
] [ringback tone]
10