Voice Guide; Number Of Rings - AT&T EL52219 Quick Start Manual

Voice guide

This feature is an alternative way for you to do the basic setup of the answering
system. You can follow the voice guide to record your own announcement, set the
number of rings, and set the message alert tone.
This feature is only available on the cordless handset.
1. Press MENU/
SELECT
2. Press CID or
CID or
3. Press
a voice prompt, "Hello! This voice guide will assist you with the basic setup of your
answering system."
4. Set up your answering system by inputting designated numbers, as instructed in
the voice guide.
NOTE: You can press

Number of rings

You can set the answering system to answer an incoming call ater 2, 3, 4, 5, or 6 rings.
You can also select Toll saver. If toll saver is selected, the answering system answers
a call ater two rings when you have new messages, and ater four rings when there
are no new messages. This feature allows you to check for new messages and avoid
paying long distance charges if you are calling from out of your local area. Unless you
change it, the answering system answers an incoming call ater three rings.
To set the number of rings:
1. Press MENU/
SELECT
2. Press CID or
/SELECT.
MENU
3. Press CID or
/SELECT.
MENU
4. Press CID or
/SELECT.
MENU
5. Press CID or
Toll saver.
6. Press /SELECT to save your setting.
MENU
NOTE: If you have muted the irst ring, you will hear one ring less before the answering
system answers the incoming calls.
when the handset is idle.
DIR to scroll to Answering sys, then press
DIR to scroll to Voice guide, then press
/CANCEL to quit the voice guide at any time.
OFF
on the handset when it is not in use.
DIR to scroll to Answering sys, then press
DIR to scroll to Ans sys setup, then press
DIR to scroll to # of rings, then press
DIR to scroll and choose among 2, 3, 4, 5, 6 or
26
/SELECT.
MENU
/SELECT. You hear
MENU
# of rings
ECO
3
ECO