Storing Images On A Usb Flash Memory Device; Scanning To A Computer - Panasonic UB-5335 Operating Instructions Manual

Storing images on a USB
flash memory device
1
Insert the power cord into the AC
outlet and press the Power Key
2
Connect the USB flash memory
device to USB Connector-A for USB
Flash Memory Device.
• When the USB flash memory device is
connected, " " will flash in the Display
Window. When the USB flash memory device
is recognized, the flashing will turn to a
continuous indication.
Note
• You cannot use a USB flash memory device
that is equipped with certain features such as
a security function or hub function.
3
Press the Copy Key
• The unit starts scanning and "
the Display Window.
" " will be displayed when scanning is
finished, and then change to "
Notice
• Do not remove the USB flash memory device
until the " " switches from flashing to a
continuous indication.
4
Remove the USB flash memory
device from the unit.
5
Confirm that the USB flash memory
device has correctly recorded the
scanned data.
6
Erase the text and diagrams from
the screen film.

Scanning to a computer

■ System Requirements
Computer
.
Interface
*1 This unit does not function with Hi-Speed USB 2.0.
Even if using a computer equipped with Hi-Speed
USB 2.0, this unit functions with Full Speed USB 2.0.
(This unit will not run at the rated speed of Hi-Speed
USB 2.0.)
*2 Microsoft
Windows XP)
*3 Microsoft
(hereafter Windows Vista)
*4 Microsoft
Windows 7)
*5 Microsoft
Windows 8)
■ Connecting to a computer
1
Insert the power cord into the AC
outlet and press the Power Key
2
Connect the electronic board to a
computer using the USB cable.
• Electronic board: Plug the B connector
.
" will flash in
".
Computer
• When the electronic board is connected to the
• The computer recognizes the electronic
®
IBM PC/AT or compatible
machine
USB 2.0 / USB 1.1*
Windows ® XP*
(Service Pack 3 or later)
OS Windows Vista
Windows ® 7*
®
Windows 8*
® Windows ® XP operating system (hereafter
® Windows Vista ® operating system
® ®
Windows 7 operating system (hereafter
® ®
Windows 8 operating system (hereafter
(smaller connector) into the electronic board's
USB port.
Computer: Plug the A connector (larger
connector) into a USB port on the computer
computer, " " will flash in the Display
Window. When the computer is recognized
properly, the flashing will turn to a continuous
indication.
board as a Removable Disk and the drive is
displayed in the Windows Explorer window.
Scanning
1
2
® * 3
4
5
.
.
23
1