Table of Contents
Advertisement
Power operation mode and setting mode
Mode
Display Window
Number lighted
Active Mode
Display flashes
Ready Mode
Display lights
–
Off Mode
(Blank)
The Copy Key or 2-Screen Copy Key has been pressed and the
unit is scanning.
The Power Key on the control panel has been pressed and the
power is on. The unit is on standby. Scans and setup can be
performed.
The Power Key on the control panel has not been pressed and
the unit is not on. If the electronic board is left in the ready mode
or in the setting mode, it will automatically switch to the off mode
after about 1 hour. When the computer is connected or while the
Remaining Film Indicator flashes, the electronic board will not
automatically switch to the off mode.
Part Names and Functions
Description
1
17
Hide quick links:
Advertisement
Table of Contents
