Character Input - Panasonic CF-M34 series Reference Manual

Dealing With Problems
Touchscreen
Unable to input by
touching the display
Reference Manual
Unable to display the
Reference Manual
Drive Operations
Cannot read/write to a
disk
Unable to write to a disk
How to format a disk is
unclear
Unable to read/write to
the hard disk
When the previous item
is not the cause

Character Input

Only capital letters are
being input
How to input European
characters (ß, à, ç),
symbols or Euro Cur-
rency Symbol is unclear
Has the Setup Utility been used to set [Touch Screen] to [2E8/IRQ7]?
( )
page 36
Confirm that the setting for resource in [Start] - [Programs] - [Updd] - [Settings] -
[Hardware] and the setting for [2E8/IRQ7] in [Touch Screen] of the Setup Utility are
appropriate.
When mouse drivers are installed (i.e. Intellimouse), the touchscreen may at times
be unable to be used. In such cases, reinstall the touchscreen driver.
Touchscreen operations may become unstable during the execution of an applica-
tion such as the Windows Media Player. In such cases, close the Windows Media
Player or use the Touch Pad.
Has Acrobat Reader been uninstalled?
If Acrobat Reader has been uninstalled, select [Start] - [Run], then type
"c:\util\reader\ar405.exe". Follow the on-screen instructions.
(Acrobat Reader can be also downloaded from "http://www.adobe.com".)
Has the disk been correctly inserted?
Has the disk been correctly formatted?
Your disk content may be corrupted.
Is the disk write-protected?
Select [Format] in [My Computer] - [3 1/2 Floppy] - [File]. After confirming the disk
volume and format type, start formatting.
Your drive or file may not have been properly set.
Check to see if the hard disk is full. If it is full, delete unnecessary files.
Your hard disk content may be corrupted. Contact Panasonic Technical Support.
Check the settings of Setup Utility and Device Manager.
Try testing another drive or media.
If CapsLock is on, the Caps Lock function is ON. To switch it OFF, press
Caps Lock .
Select [Start] - [Programs] - [Accessories] - [System Tools] - [Character Map].
The Character Map will be displayed. Point to the desired font name and select it.
(Advanced)
48