Panasonic CF-M34 series Reference Manual page 7

Touch Pad
(Advanced)
Indicates an operation applicable to the Microsoft
Wheel
Indicates an operation applicable to the original mode.
Original
Basic Operation
Function
Moving the Cursor
Tapping/Clicking
Double-Tapping/
Double-Clicking
Dragging
Scroll*
Scroll a document
(rotate the wheel)
Auto Scroll*
Automatically scroll a document
(move the mouse after clicking
the wheel)
*
In [Start] - [Settings] - [Control Panel] - [Mouse] - [Tap and Buttons]
Touch Pad Operation
Wheel
Original
Wheel
Original
tapping
Wheel
Original
double-tapping
Wheel
Original
Two quick taps, but on the
second tap leaving your
finger down (applying
pressure) and moving it
on the work surface.
When a check mark
Lock] *
After the drag operation (above : left side), it
is necessary to determine the destination (i.e.,
location of drop) by one tap. Under the con-
dition no destination is selected, do not use
the suspend or hibernation function. Nothing
is shown on the display, even after resuming
from the suspend or hibernation mode.
In this case, the display will return after a tap
or click is made.
Wheel
Wheel
Original
Wheel
Operate after pressing the two buttons simul-
taneously.
When releasing the auto scroll function:
One tap on the work surface.
® TM
IntelliMouse Wheel mode.
Move the tip of your finger
lightly over the surface.
or
clicking
or
double-clicking
or
While holding down the
button, moving your fin-
ger on the work surface.
is added for [Drag
Original
2
(To next page)
7