Scan Setting In The Touch Panel - Toshiba E-studio 200L Operator's Manual

1. SCAN SETTING IN THE TOUCH PANEL

If the scanning function is used, originals set on the reversing automatic document feeder (optional) or on
the original glass can easily be scanned as image data.
The scanned image data can be sent or stored to the destinations of "SCAN TO e-FILING", "SCAN TO
FILE" or "SCAN TO E-MAIL".
* See the [e-Filing Guide] about how to save the data to PCs.
To use scanning function, 'optional Printer kit and optional Scanner upgrade kit', or 'optional Printer/Scanner
kit' is required.
* To use this function for e-STUDIO200L, you need to install above options and the network interface card
(optional).
Scanning Procedure
1
Place the original(s).
- "2.SETTING ORIGINALS"
7
- Originals acceptable to be set "2.SETTING ORIGINALS"
Page 51
- When placing an original on the glass "When Placing an Original
on the Glass"
- When placing the original on the reversing automatic document
feeder (optional) "16.CONTINUOUS/SINGLE ORIGINAL
FEEDING"
2
Press the [SCAN] button on the control
panel to enter the scan menu.
- The basic scan menu is displayed.
3
Select the desired scan mode and press
the button.
- The screen on the right is displayed as an example of selecting
SCAN TO E-FILING.
- To select SCAN TO E-FILING "2.SCAN TO e-FILING"
152
To select SCAN TO FILE "3.SCAN TO FILE"
To select SCAN TO E-MAIL "4.SCAN TO E-MAIL"
150
7.SCANNING THE IMAGES
Page 51
Page 52
Page 139
Page
Page 156
Page 160