Copying On An Envelope - Toshiba E-studio 200L Operator's Manual

Copying on an Envelope

To copy on an envelope, perform the following procedure.
* The copied envelope exits into the inner tray regardless of the finisher (option).
1
Pick up about 5 envelopes, fan the
envelopes well and align the edges.
2
Place the envelopes on a flat clean
surface and press them with your hands
in the direction of the arrow to expel any
air.
- Correct any bent corners on the envelopes.
- Press them well to prevent the flap from rolling upward.
3
Place the envelopes on the bypass tray
and align the guide to the envelope size.
- Place the envelope with the side to be copied face down and the
flap to be front.
Do not copy on the back of the envelope. This may cause a paper
jam or soil the copied paper or the inside of the equipment.
2
69